My old 2.0 Zetec Fiesta on throttle bodies

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) :( :o :shock: :? 8) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :!: :?: :idea: :arrow: :| :mrgreen: :rolleyes:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: My old 2.0 Zetec Fiesta on throttle bodies

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by creator » Fri Jun 11, 2010 12:09 pm

i dont think id trust myself to cut the roof off mate :lol: lol really want one tho after seeing looks there awsome 8)

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Wed Jun 09, 2010 1:41 pm

Yeah I think it was £500 new. Mine was the reinforced honey comb version, which was more expencive but safer on the road. The aren't hard to fit, especially on a fiesta. Cut your existing roof out but leave 1.5 inches all the way around, sand it down and tiger seal it on.

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by creator » Fri Jun 04, 2010 6:16 pm

thats a shame muz i was going to offer you some money for it if you still had it :P
shame you lost so much money on it tho.iv been looking at them for mine there around £500 from performance trim just not enquired about how much it would cost to fit one at any body shops yet tho,duno if i dare :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Thu Jun 03, 2010 3:18 pm

I sold it Danny....brand new, never fitted, for about half of what I paid for it :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by creator » Wed Jun 02, 2010 6:19 pm

what happend to the carbon roof mate?

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by toms2 » Thu Apr 15, 2010 8:00 pm

looked nice muz. i had a set of rs accessory wheels on my old mk4 fiesta. looked ace with 195 40 16's on there 8) should've taken them off the car when i sold it mind but i have too many sets of wheels anyway :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Mon Mar 08, 2010 2:27 pm

Jano_OddKidd wrote:the bumpers are nice.



Proper MK3.5 RS Accessory jobs. When they were on that car, there was only one other I knew of that had them. Pretty rare. They pop up now and again but always seem to be un painted. No one actually fits them :lol:

Best Fiesta bumpers by far. Wish I hadn't sold them TBH

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by Jano_OddKidd » Sun Mar 07, 2010 10:12 pm

the bumpers are nice.

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by davemartin66 » Fri Mar 05, 2010 9:55 pm

cheers mate will look out for them

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Fri Mar 05, 2010 9:53 pm

They were re finished in Audi RS6 Grey with a matt laquer. Looked awsome but wouldn't fit over my brakes :(

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Fri Mar 05, 2010 9:51 pm

lincolnRS2 wrote:I'm guessing thats a mk5 RS2k mate?

My chassis rails wer'nt that bad mate but my floor was rotten from the rear footwells all the way round to under the pedal's totaly foobarbed I replaced the lot 8)


Yep MK5 RS2k cosworth replica. Worrying it had 2 months MOT left on it aswell :shock: :lol:

davemartin66 wrote:there very nice mate, i wanted just mondeo ones on mine now i either want the ones u had or esc cos ones


They do pop up on eBay mate, but aalot of people selling them also think they are just Mondeo rims. Just message everyone selling a set and see if they say 7j 16 in the centres like so. (can just about make it out)

Image

You can see the dish in this pic 8)

Image

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by davemartin66 » Fri Mar 05, 2010 9:02 pm

there very nice mate, i wanted just mondeo ones on mine now i either want the ones u had or esc cos ones

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by lincolnRS2 » Fri Mar 05, 2010 8:54 pm

I'm guessing thats a mk5 RS2k mate?

My chassis rails wer'nt that bad mate but my floor was rotten from the rear footwells all the way round to under the pedal's totaly foobarbed I replaced the lot 8)

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Thu Mar 04, 2010 9:54 pm

The fiesta wheels? They are RS Accessory 7x16 ET35 wheels. I tried explaining to people they WERE NOT mondeo wheels but not many people knew about them. They were very very rare. Especially in Et35 as most were ET42. They were 1/2 wider and had a deeper dish an the spokes were about10mm chunkier than regular mondeo wheels. They were on 165/40/16 tyres there 8)

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by davemartin66 » Thu Mar 04, 2010 9:29 pm

Those wheels r well nice where did u get them from mate?

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Thu Mar 04, 2010 4:35 pm

Sean. A few pics fo my RS2000. Was your quite this bad :shock: :lol:

Image

Image

Image

Image

Image

Image

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by lincolnRS2 » Wed Mar 03, 2010 8:20 am

frsjon wrote:was a nice looking car mate and dont feel bad all fiesta's look like that underneath...well all the ones ive owned.... :lol:


Feista's lol my RS2000 was like that underneith at 1 point ain't now though 8) Its a ford thing :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by frsjon » Mon Mar 01, 2010 8:22 pm

was a nice looking car mate and dont feel bad all fiesta's look like that underneath...well all the ones ive owned.... :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by Kevin_Mc » Mon Mar 01, 2010 5:05 pm

looks like an immaculate car, bet it went well. Definately looked the part until you see the underside :shock:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by xr stuart » Sun Feb 28, 2010 10:22 pm

looked nice

shame about the underside

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by turbo nutter » Sat Feb 27, 2010 8:40 pm

deffo a no brainer there fella,good move :lol:

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Fri Feb 26, 2010 8:33 pm

I took it off the road Sean to fit the throttle bodies, tidy it up with the roof, brakes, rear beam etc and paint it. The filler cap area was 100% mint as were the arches which is rare on a MK3 Fiesta and the underside looked solid when i went to view, albeit COVERED in waxoyl. Thinking that the filler area was mint the floor would be and the wazoyl was a sign it was well looked after. However the chap who owned it before sold it to his boss, who then sold it back to him, and in the time his boss owned it, he steam cleaned the underside EVERY week which had stripped the underseal off. When I jacked it up and removed the interior there was litrally nothing left under the waxoyl.

Image

Image

Both sides were like this. It needed, floor pans, inner and outer sills, rear chassis legs, floor to bulkhead coners :cry: Then my brother told me the Escort was for sale, went to look at it and thought hmmmmm mint RST for £1500 or weld up this shitbox Fiesta. No brainer really.

Re: My old 2.0 Zetec Fiesta on throttle bodies

Post by lincolnRS2 » Fri Feb 26, 2010 8:21 pm

I like that Muz looks nice mate what happened to it :shock:

My old 2.0 Zetec Fiesta on throttle bodies

Post by muz » Fri Feb 26, 2010 6:06 pm

Just been going through my photobucket account and found pictures of my old Fiesta. Everytime I see it I'm gutted I never finished it and what a car it could have been. :cry:

Had a 2.0 Stage 3 Zetec engine (Kent cams and verniers, slightly raised compression, GSXR 48MM Throttle Bodies on Megasquirt, 4 branch manifold), was being resprayed in Audi Delphin Grey, Rare RS Assessory bumpers, 7J RS Accessory Wheels, Carbon roof and bonnet, Front Wilwoods, Zetec S Rear beam and focus RS rear disc, MK5 Fiesta dash, Orion 200E leather recaros etc etc

Pics

Image

Image

Image

Image

Image

Moan over :lol:

Top

cron