OKC OddKiddCreations

by **s1kid** » Fri Sep 01, 2006 11:54 pm

Jano_OddKidd wrote:The braıded pıpe ıs $12 per meter.

Would there houses suit an oilcooler aswell?

by **tim10_10** » Sat Sep 02, 2006 1:44 pm

Lookin good mate, what spec is the cvh now? How does it compare to the zetec?

by **Jano_OddKidd** » Sat Sep 02, 2006 6:33 pm

the pıpes would be fıne for the oıl cooler but may need some decent ends puttıng on ıf used wıth hıgh pressure. Just to be safe :wink:

by **zetec-turbo** » Sun Sep 03, 2006 12:45 pm

tim10_10 wrote:Lookin good mate, what spec is the cvh now? How does it compare to the zetec?

well without stating the obv that the CGI engine felt faster :lol:

I really like the CVH as its a good engine and is still rapid running its 24psi :shock:

both engines pulled jsut as smoothly, but thats down to a good management set-up :wink:

and TBH so far have only driven it once just a quick test drive to me local town and back, but still managed to rip up a focus RS down the high street, ALS'ing all the way :lol:

was propa funny looking at all the shopers running for cover and sheltering there young as i was on full chat poping and banging up the high street :bigcry:

by **tim10_10** » Sun Sep 03, 2006 12:59 pm

sounds quality, are you using standard internals to run 24 psi or have you got steel rods and different pistons?

by **zetec-turbo** » Sun Sep 03, 2006 1:00 pm

has over sized pistons, but otherwise bottom end pritty std :wink:

by **tim10_10** » Sun Sep 03, 2006 1:04 pm

Thats impressive, do you run 24psi all the time? Is it due to the correct fuel management setup that you can safely do this?

by **zetec-turbo** » Sun Sep 03, 2006 1:05 pm

can do it safely due to the m/ment the injectors etc yeah, and the fact that the air injectors peak it at 24psi and hold 24psi all the way thro the rev range

by **Jano_OddKidd** » Sun Sep 03, 2006 5:32 pm

ROK ON

by **BLaCk SeRiEs 1** » Mon Sep 04, 2006 7:27 pm

aVit!

by **steveS2** » Mon Sep 04, 2006 7:30 pm

so wen u cumin street racin bitch... me n u destroy em all!!!!

by **zetec-turbo** » Thu Sep 07, 2006 5:59 pm

Gunna have some new external pics of me car to put up tomoz

it be looking hard core now :wink:

think i be needing a new sig too :roll:

by **steveS2** » Thu Sep 07, 2006 6:03 pm

by **zetec-turbo** » Fri Sep 08, 2006 2:02 pm

New rims are hard as :mrgreen:

Compomotive MO's 6 spoke 16's fitted with Parada 204/40 16 tyres

by **steveS2** » Fri Sep 08, 2006 11:50 pm

i do really like them matey

by **davey** » Sat Sep 09, 2006 12:29 am

wheels look the bouncyfunlumps mate

by **BLaCk SeRiEs 1** » Sat Sep 09, 2006 1:15 am

u no i thought they looked the bolloxx :wink:

by **lincolnRS2** » Sat Sep 09, 2006 7:10 am

Sweet as G :supz:

by **S1_daz** » Sat Sep 09, 2006 12:11 pm

yea man looks well hard

by **BLaCk SeRiEs 1** » Sat Sep 09, 2006 3:16 pm

boom ting'

by **MichaelRST** » Tue Sep 12, 2006 12:58 am

lookin good mate especially the black engine and charge pipe etc. loving the new rims aswell

by **NEIL@FASTFORD** » Tue Sep 12, 2006 9:26 am

Nice one G! I knew it would look the nuts on those!

by **XR3-keith** » Tue Sep 12, 2006 6:24 pm

Looks sweet

by **zetec-turbo** » Wed Sep 13, 2006 1:49 pm

thanking you's peeps

by **lincolnRS2** » Wed Sep 13, 2006 10:28 pm

OKC OddKiddCreations

16v Zetec Turbo - NOW CVH

Who is online

OKC OddKiddCreations

16v Zetec Turbo - **NOW CVH**

Who is online

16v Zetec Turbo - NOW CVH