OKC OddKiddCreations

by **e11nwd** » Mon May 30, 2005 7:31 pm

wot turbo & actuator is that

by **e11nwd** » Mon May 30, 2005 7:38 pm

was is that!! pardon my ignorance! :oops:

not a pro "yet" when it comes to rs engines! :roll:

by **BLaCk SeRiEs 1** » Mon May 30, 2005 9:39 pm

that is a fuel regulator, and the turbo is a stage 3 4x4 cossie turbo, with a -31 actuator

by **BLaCk SeRiEs 1** » Mon May 30, 2005 9:41 pm

just looked, and you cant see the actuator in any of them pics, which one woz you looking at?

by **e11nwd** » Tue May 31, 2005 6:47 am

matey

[/quote]

that 1 !
are these the best actuators to get,for this kind of turbo?
ive heard collins make a good 1.

by **BLaCk SeRiEs 1** » Tue May 31, 2005 11:03 am

ahhhh... good spot! i didnt see that. yea its a -31, i wouldnt use a collins one mate

by **Jano_OddKidd** » Tue May 31, 2005 11:20 am

From what i can remember the actuator is a -34.

The Turbo is a Group N de- restricted 4x4 Type.

by **pigeonrst** » Tue May 31, 2005 1:42 pm

jano wat type of pipes r u using for water. oil. vacum etc, lookin realy clean a tidy?

by **Jano_OddKidd** » Tue May 31, 2005 8:34 pm

The pipes with stainless braid come from a local company who make pipe work for plumbers etc... :lol:

I buy most of my pipe work from them, the braided front brake lines work out ?23 a pair. That well cheap and its Goodridge stuff

I use the same pipes for oil, water, and fuel. Its ment for fuel but can pass anything, as its good enough not to rot and split.

The Vacum pipes and connectors come from FESTO, they design and make Hydrolic machine equipment and components. The filters i use for water injection come from them and only pass 1 in 50,000,000 particles :shock:

quite expensive for what it is tho.

But if you can imagine hard platic breather pipes in your hand and try to wrap it around your arm the STD ford stuff with crease.....The FESTO pipes can bend in every angle without causing and restrictions or creases.

The blue water pipes are obviously Samco or SFS

just used decent clamps with them :wink:

If you would like any of the pipe work or fittments just ask.

HTH
Regards
Jano

by **e11nwd** » Tue May 31, 2005 10:15 pm

i wouldnt use a collins one mate[/quote]

why's that?

and what acuator would you recomend to use with 1 of janos 4x4 st 3 cossy turbos?

by **pigeonrst** » Tue May 31, 2005 10:20 pm

k well i will keep tat in mind and will give u a call wen im needing pipework for the s2. looks like the perfect stuff for the project, gotta try keep everythin to a high spec. ye does that company make the front brake lines which go from the master cylinder straight to the calliper, i saw them on gareths s2, if so how much are they for the pair and can u get them ?

cheers
john

by **Jano_OddKidd** » Tue May 31, 2005 10:45 pm

The price for the two front caliper lines are around ?80 they do look KOOL and will work very well with his 4pots :wink:

by **Jano_OddKidd** » Tue May 31, 2005 10:46 pm

e11nwd wrote:what acuator would you recomend to use with 1 of janos 4x4 st 3 cossy turbos?

Garret -31 maytee :wink:

set with 7psi pre load.

by **pigeonrst** » Wed Jun 01, 2005 12:05 am

80 may be a bitty out of my budget, altough i really want a set.

by **Jano_OddKidd** » Wed Jun 01, 2005 10:27 am

I said the same thing mate :lol:

I stuck with the metal ones and just used the braided to the calipers instead of the whole lot

by **pigeonrst** » Wed Jun 01, 2005 11:14 am

ye i hav a roll of metal pipe so will jus make up som myself. how much can u get me a set of braided lines for? ill be using 4x4 callipers at the front and either 2wd or 4wd at the rear

cheers
john

by **Jano_OddKidd** » Wed Jun 01, 2005 7:43 pm

I will be going there hopefully this week to have some made for another motor so i will let you know the exact amount for the front and rear.

by **pigeonrst** » Wed Jun 01, 2005 9:04 pm

sound

by **zetec-turbo** » Thu Jun 02, 2005 9:17 pm

pigeonrst wrote:80 may be a bitty out of my budget, altough i really want a set.

Yeah, i thought that too :lol:

still baught them tho

by **pigeonrst** » Fri Jun 03, 2005 11:43 pm

haha aye

by **pigeonrst** » Sun Jun 05, 2005 5:57 pm

any news on the braided hoses jano?

by **Jano_OddKidd** » Sun Jun 05, 2005 6:03 pm

I didnt get a chance to go down there mate, i deffo will either tomorrow or tuesday.. as far as i can remeber they cost the MAX of ?25 for front pair.

I will ring tomorrow and ask :wink:

Regards
Jano

by **pigeonrst** » Sun Jun 05, 2005 6:05 pm

cheers

by **Jano_OddKidd** » Wed Jun 08, 2005 9:17 am

Im going down there today :oops:

OKC OddKiddCreations

OKC S1 full rebuild (FINISHED 27th AUG 05) - AUG 09

Who is online